Victron Phoenix 24V 180VA, 230V, Sinewave Inverter, Schuko Output PIN024181200

Part No:

QuickCode:61E

Victron Phoenix 24V 180VA, 230V, Sinewave Inverter, Schuko Output

RRP:	£~~96.00~~
Our Price:	£84.00
VAT @ 17.5%:	£14.70
Total:	£98.70

Qty

Seen it cheaper?

Additional Information

24Vdc to 230VAC Sine wave Inverter

An affordable quality true sine wave inverter. Built to the same high standards as the rest of the Phoenix range, this power inverter will provide 175W (180VA) of continuous output. Its peak power of 200W enables it to cope with devices that require an initial surge of power for a few seconds at start-up.

Pure Sine Wave Output
200 Watt Peak Output
175 Watt (180VA) Continuous
2.7kg in weight
Cigar lighter plug via 1.5m battery cable
Dimensions h72 x w132 x d200 (mm)

The Input connection is via a 1.5m cable with cigarette plug that allows the unit to be easily positioned, and portable between vehicles.

Output Connector: Schuko (Euro Connector)

SinusMax - Superior engineering

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.

Extra start-up power

A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.

Virtually unlimited power thanks to parallel and 3-phase operation capability

Up to 6 units Phoenix 24/3000 can operate in parallel to achieve higher power output. Six 24/3000 units, for example, will provide 15 kW / 18 kVA output power. Operation in 3-phase configuration is also possible. (Please request VE.Bus enabled units for best 3 phase performance)

To transfer the load to another AC source: the automatic transfer switch

If an automatic transfer switch is required on models rated at 800 VA or more, we recommend to using the Phoenix Multi instead. The switch is included in these products and the charger function of the Multi can be disabled. For our lower power models we recommend the use of our Filax Automatic Transfer Switch. Computers and other electronic equipment will continue to operate without disruption because both the Filax and the Phoenix Multi feature a very short switchover time (less than 20 milliseconds).

Computer interface

All models rated at 1200 VA or more have a RS-485 computer interface. All you need to connect to your PC is our data link MK2 (see under accessories). This data link takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. Together with the VEConfigure software, which can be downloaded free of charge from www.victronenergy.com , all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems.

Victron Phoenix 24V 180VA, 230V, Sinewave Inverter, Schuko Output

PIN024181200

Accessories

Batteries

Battery Chargers

Inverter / Chargers

Power Inverters

Grid Connect Inverters

Solar Energy

Wind Turbines

DC to DC Converters

Power Supplies

Power Accessories

Cable Products

Useful Links

Search

QuickCode

Power Manufacturers

Feller Power Cables

Electronic Components

Trade Enquiries

Fast Delivery